Products

The XP Series Suspension Platform is composed of main components such as suspension device, platform, traction hoist, SafeLock, electric control system, wire rope, etc.; The suspension device is fixed on the roof, and the platform relies on its own hoist to climb along the steel wire rope, which can run vertically up and down, and freely hover at any height for work. The entire system is self-contained and does not require any external assistance, making it flexible and convenient. The modular main structure and standard sections made of aluminum alloy material are spliced into a platform of the required length.

The suspension platform is composed of suspension device, platform, traction hoist, SafeLock, electric control system, wire rope, and other major components. The suspension device is fixed in the cylinder wall, and the platform relies on its own hoist along the steel wire rope to climb. Operators can run up and down in the vertical direction, and they can be free to hover at any height for work. The whole system is self-contained, flexible, and convenient to use without any external assistance. Modular main structure and aluminum alloy material of the standard section are spliced into the required diameter of the tower platform.

It is composed of suspension devices, platforms, traction hoist, SafeLock, electrical control systems, wire ropes, and other main components, mainly used for engineering operations such as repairing and maintaining refractory materials, membrane walls, and spray gun interfaces in household waste incinerators.

As an auxiliary climbing equipment, the Climb Assist can provide a continuous lifting force of about 30-50kg for the climbing personnel of the wind power tower, reducing the climbing intensity and reducing the risks that may be caused by physical exertion.

The Auto Hatch Opener makes CAS operation even more convenient by automatically opening and closing platform hatches as the car passes through them.

It is mainly used as a fixed suspension point on personal protection equipment to prevent the personnel from falling during operation. It can also be used as a suspension point on auto descending device for the personnel to escape.

The safety protection device of the ladder is used to protect the safety components of the climbing personnel during operation. GB5144 requires that vertical ladders above 2 meters above the ground should be equipped with a cage. It is suitable for tower cranes, stacking machines, signal towers, power towers, factory buildings and other operating scenes that require climbing for maintenance and construction.

Made of special aluminum alloy, it has the characteristics of long-term corrosion resistance.
Scientific design, no welding required for on-site installation, cost-saving, beautiful and sturdy.
Interlocking with the elevator, high safety.

Safe evacuation when working at height

Application Scenarios : Wind power escape, rescue, and training drills

The Evacuation and Rescue Device is used for emergency descent and assisted rescue. It enables the fully

automatic, controlled evacuation of up to two people simultaneously. The dual-brake mechanism with active

heat dissipation ensures reliable performance, even when descending heavy loads from great heights.

TL20 is an optimal solution designed for tower crane to both improve overall efficiency and alleviate operators’ work load. The model is entrusted with its optimized safety features and easy mounting/dismounting in complicated working condition.

Sporty appearance, made of flame-retardant ABS material.
Suitable for various construction sites such as building, oil, and metallurgy, as well as for outdoor sports protection
including mountaineering, rock climbing, and river trekking. It is also applicable for rescue and safety protection.