Rack and Pinion Industrial Elevator
product description
Mast Tie
Structural member that connects the mast to industrial equipment facilities or other fixed structures, providing side support for the mast.
Overspeed Safety Device
Mechanical safety protection device that prevents the cage from falling, controlled by non-electric, non-pneumatic, and non-manual methods.
Mast
Structural frame that supports and guides the cage, counterweight (if applicable).
Interlocking Device
After the cage leaves the landing, the cage gate and all landing gates are locked by mechanical locks and cannot be opened normally. When the cage is moving, if the landing gate or cage gate is accidentally opened, the cage will stop motion immediately.
Insulated Conductor Rail
Supply power to mobile devices.
Rack and Pinion Drive
A forced drive system.
Gear Motor
An integration of a gear box and a motor. The use of a gear box reduces the motor speed and increases the output torque, making it suitable for different operating conditions.
Automatic leveling
A feature allowing the cage to stop precisely at a landing level with millimeter-level accuracy. This is achieved by integrating high-precision encoders or sensors with a sophisticated logic algorithm.
Key Features
Progressive overspeed safety device
Cage gate and landing gate interlocking device
Overrunning prevention design at the top and bottom
Overload detection device
Multiple limit switches
Cage tilt prevention hook
Manual descent function for power loss situations
Motor overheating protection
Trapdoor at the cage top
Operating alarm with audible and visual signal
Evacuation ladder
Personal fall arrester
Specifications
Industrial Elevator SL200
Model |
SL200 |
Rated load |
2000 kg |
Max. number of persons |
24 |
Rated speed |
0-36 m/min |
Working voltage |
400 V, 50/60 Hz |
Motor power |
2×15 kW |
Internal cage dimensions (length × width × height) |
3000 mm × 1500 mm × 2200 mm |
Corrosion resistance rating |
≥ C4 |