Climb Auto System: Automated Climbing in Wind Turbine Tower Solution
product description
Top Sheave
The top sheave’s compact design allows the CAS car to reach the uppermost platform.
Operator’s Personal Fall Arrester
The fall protection system of the CAS is independent from the operator’s fall arrester.
Climb Auto System’s Fall Protection Device
Redundant fall protection guarantees the safety of personnel and equipment.
Control Cabinet
Located down-tower, the control cabinet is used to power the system up and down. It can also be used to operate the CAS car remotely.
Remote Control
The convenient remote control feature allows technicians to call the car to their position in the tower or send equipment to a co-worker on another platform.
Two-Handle Start-Up Switch
To use the CAS car, the operator must press and hold the switches on both handles simultaneously.
Collapsible Footboards
The collapsible footboards enable rapid evacuation in case of emergency.
Bottom Sensing Panel
When coming in contact with an obstacle, the panel is compressed and the sensor is triggered. This immediately stops the CAS car, thus preventing collision.
Key Features
CE, ETL, UL and OSHA compliant
Independent Fall Protection System
Triple Control System
Overspeed Lock-Up
Variable Frequency Drive
Overload Detection
Platform Approach Indication
Manual Emergency Brake
Foldable Footpanels for Evacuation
Specifications
Constructing materials |
Aluminum, steel |
Rated load |
Man load capacity: 140 kg (310 lbs) Freight load capacity: 60 kg (132 lbs) |
Speed |
18 m/min |
Control method |
Frequency conversion vectorial technology |
Rated voltage |
Single / 3 phase, AC, 220 V, 50 Hz / 60 Hz (400 V optional) |
Dimensions |
415 x 390 x 1180 mm |
Certification |
CE, ETL, UL and OSHA compliant |