3S LIFT Horizontal lifeline system
product description
End anchor
The end anchor mainly includes the anchor point and the bracket. It is made of stainless steel 316L. It has passed the CE certification and meets EN 795: 2012.
Intermediate anchor
The intermediate anchor, as a welded member, does not need to be removed because a traveller can pass through it smoothly.
Turn anchor kits
The turn anchor kits are mounted for the wire rope to pass a corner. The turn anchor kits, as welded members, do not need to be removed because a traveller can pass through it smoothly.
Tensioner
The tensioner can be used for tensioning the lifeline and reducing the lateral displacement of lifeline when a person falls, so as to reduce the falling height of personnel and the impact force.
Shock absorber
The shock absorber plays the role of buffer and reduces the impact force when there is a falling. This, to some extent, can ensure the safety of personnel and weaken the possible impact injury.
Traveller
The traveller can move along the lifeline and pass the intermediate anchor and turn anchor kits smoothly, and can be assembled and disassembled at any position on the lifeline.
Wire rope
The wire rope diameter is 8 mm, and it can be made of zinc coating, stainless steel 304 and stainless steel 316.
Technical specifications
Model |
TF-SH80/TF-SH83/TF-SH10 |
Material |
Stainless steel / hot-dip galvanizing wire rope |
Wire rope diameter |
8.0 mm/8.3 mm/9.5 mm |
Rated load |
12 kN |
The distance between two adjacent end anchors |
≤ 12 m. |
Applicable fall arrester type |
TF-H10 |
Standard |
EN 795 |
Certified by |
CE |
Customization |
Customized design and manufacture according to the customer’s demands. |